Trend CLT/SLV/63127 Collet Reducer Sleeve 6.35mm to 12.7mm saw bottom holes and through holes

bottom holes and through holes in to hard and softwood applications

A reliable spanner with great features that see’s it widely used by DIY enthusiasts and professional alike

20 x 450mm SDS+ Masonry Drill Bit Key Benefits

The Trend CLT/SLV/63127 reduction sleeve can be used to reduce the collet size

Trend CLT/SLV/63127 Collet Reducer Sleeve 6.35mm to 12.7mm saw bottom holes and through holesCollet Sleeve CLT SLV 63127 From Trend 1 2" to 1 4" The Trend CLT SLV 63127 reduction sleeve can be used to reduce the collet size, enabling your router collet to take cutters with smaller shanks. Whilst the correct size collet is always recommended, this collet sleeve can be used as a temporary stop gap. It is best not to use this for extensive periods or heavy work. Suitable for models T7 T10 T11. Collet Sleeve Specifications: D=1 2 inch D=12. 7 mm